QSC GX5 Power Amplifier

The customer service team asked for a photo and came up with an easy to install, great sounding speaker and now our home theater sounds great. Did you find this helpful? Now its time to replace a different old speaker. They sound very good at a good price. They sound as good as the original. Paul from Jackson, TN. Fit my old Advent Minis nicely.

qsc rmx 2450 to 12 speaker setup.

Unplug the apparatus during lightning storms or when unused for long periods of time. Page 4 Features 1. Front power LED 4. Cast aluminum handles 5. M10 installation points 7. M5 yoke attachment points 8.

The RMX Series amplifiers from QSC offer true professional-quality performance at an affordable price. Four 2-rackspace models range in power from to watts per channel at 2 ohms. Two 3-rackspace models provide to watts per channel at 2 ohms.

QSC designers, headed by Pat Quilter, have optimized output and appearance while reducing raw material cost and weight. GX amplifiers deliver just the right amount of power to the most popular speakers used by entertainers. Most loudspeaker manufacturers recommend an amplifier with power output equal to the speaker’s “Program Music Power” rating or two times 2 x the “Continuous RMS Power” rating.

Owners of popular 4 ohm loudspeakers dual-woofer, two-way models and many subwoofers will find the watt 4 ohm power of the GX5 an ideal match. Premium toroidal power transformers for reliable “mid-weight” performance. A variable-speed fan moves air crosswise through the amplifier, drawing cool air in over the power transformer, through the fan, and then over the heat sink.

=> Oxygen Audio AIR10.2 10 inch. Subwoofer, 300 Watts, Dual Voice Coil (O2 AIR10.2)

How do I hook up a mixer to the rest of the system? What jacks are best to use? How do I use graphic equalizers? What are compressors used for? How do I use groups?

Sep 19,  · The QSC GX3 amplifier is ideal for professional entertainers who require maximum performance and portability on a limited designers, headed by Pat Quilter, have optimized output and appearance while reducing raw material cost and weight.

I am back again because I had to purchase one more K8. I have fallen in love with this little giant.. If that’s the main reason listen to this.. Get the specifications sheet for the speaker and load them using the PA2 app. Trust your ears and tune your speakers from the front of house.. Your sound will forever deliver all the quality and punch you will ever need.. If you eliminate the distortion and keep your meters in the green your system will deliver sound you never knew you had..

I am totally blown away with the amount of clean green signal volume I am able to produce.. I am always surprised every time I hookup my set for an event and hear that clean rich sound produced by these speakers tuned Sweetwater is a great company with outstanding customer service.. Go Mike W by Wyatt R. Powerful and great clarity.

SNAPPER Rescue Mission!

Thanks for being a fantastic company! I kept my analog board but have not taken it out of the case since purchasing the TouchMix over 9 months ago. There is a brief learning curve I practiced with it for a week in the basement before using it at a venue. The ability to record is a plus, but when bands find out you have that feature, they will want a recording every time.

The rear panel of the M-Audio SBX10 powered sub-woofer shows how powered sub-woofers integrate with your existing powered speakers. Digital DJ Tips reader Ian asks a question that comes up surprisingly often: “The question I have is how do you hook up a sub to a controller? I see my controller has both speaker outputs, but nowhere to plug in a sub.

Specifications GX Series amplifiers are ideal for professional entertainers who require maximum performance and portability on a limited budget. QSC designers, headed by Pat Quilter, have optimized output and appearance while reducing raw material cost and weight. It’s all here — dramatic styling, easy hookup and adjustments, excellent audio quality and QSC reliability. GX amplifiers deliver just the right amount of power to the most popular speakers used by entertainers.

Most speaker manufacturers recommend an amplifier with power output equal to the speaker’s “Program Music Power” rating or two times 2 x the “Continuous RMS Power” rating. The GX3 is ideal for speakers in the watt Program range, while the GX5 provides full performance for watt Program speakers. A true Class B biasing system combines maximum thermal efficiency with excellent audio performance.

QSC CP8 – 8-inch 2-Way Compact Powered Loudspeaker (Single)

Attempting to use an amplifier at an unstable load will damage the amp. Note that some high end car audio vendors intentionally underrate their amplifiers so that a 50×2 Watt amplifier 4 ohms really does produce x1 4 ohms. This is done so that car stereo systems using their equipment can enter car audio competitions in a lower Wattage category, giving them an edge over the competition. Meanwhile, many low end manufacturers overstate the power of their amplifiers.

QSC designers, headed by Pat Quilter, have optimized output and appearance while reducing raw material cost and weight. It’s all here – dramatic styling, easy hookup and adjustments, excellent audio quality and QSC reliability.

QSC designers, headed by Pat Quilter, have optimized output and appearance while reducing raw material cost and weight. It’s all here — dramatic styling, easy hookup and adjustments, excellent audio quality and QSC reliability. GX amplifiers deliver just the right amount of power to the most popular speakers used by entertainers.

Most loudspeaker manufacturers recommend an amplifier with power output equal to the speaker’s “Program Music Power” rating or two times 2 x the “Continuous RMS Power” rating. The GX5 provides full performance for watt Program speakers. The GX5 supplies maximum possible power to 4 ohm and 8 ohm loads. Owners of popular 4 ohm loudspeakers dual-woofer, two-way models and many subwoofers will find the watt 4 ohm power of the GX5 an ideal match.

QSC design expertise allows the output devices to shift from low-power to high-power rails in less than a millionth of a second, ensuring that the output power is always right where it needs to be without excess loss. Both amplifiers use premium toroidal power transformers for reliable “mid-weight” performance. A variable-speed fan moves air crosswise through the amplifier, drawing cool air in over the power transformer, through the fan, and then over the heat sink.

This keeps the transformer cool and allows a full size heat sink to fit in a down-sized chassis. As always, the amplifiers are fully protected from the usual hazards of the trade, ensuring stable performance and long life. GuardRail GuardRail protection delivers full peak power while preventing detrimental overloads.

QSC GX3 425 Watt Two Channel Stereo Power Amplifier

Lives for gear Those PV ‘s need at a bare minimum of watt’s each , your running 4 speaker’s that need watt’s each on 1 one watt amp so you don’t have enough power on any of your main’s or sub’s. As for your two PVx monitor’s, they need Watts each as well so your really not giving them enough power ether but, they should be happy with the watts they are getting. If your band s have a high stage level, meaning, they turn up there amps and the drummer is a hard hitter, you will need full power and likely more monitor’s.

The Yamaha mixer’s amp’s would “optimally” work for any 2 of your speaker’s but that’s about it really, I would use the mixer’s amp’s for your main’s. That way you can run both your aux-send’s to each monitor for a separate mix for each monitor, one from each side of one of the extra amp’s.

An optional finish of black ultrathane paint (LSB) is also available. Additionally, the Speakon™ connectors feature a configuration switch which allows instant reversal of Speakon™ jack pinouts for easy single wire hook-up using optional four wire Speakon™ cables.

The first thing I thought as I saw the box on my doorstep was “Boy that box isn’t that big” Then I went to pick it up and grunted a bit. This sucker is heavier than it looks! About a 40lb box with relatively svelte dimensions. After bring it into the theater with all the anticipation of a ten year old boy on Christmas day, I opened the box. The amp was packed very well, with ample protection for whatever punishment UPS could dish out. The box contains a beefy power cord with an IEC connector to fit in the amp’s socket, the amplifier itself, unattached adhesive rubber feet, warranty card, and instructions.

As I lifted the amplifier out of the box it was evident that most of the weight was, in fact, the amp itself. As listed in the printed specs, the amplifier itself weighs about 36lbs. This is due to the amplifier’s case being made of heavy gage steel, with one piece of steel being folded to make up the front, bottom, sides, and rear. The front panel is reinforced where the amplifier attaches to the rack system and integral to the design are rear attaching points for extra stability in mobile applications.

The top is made of stamped steel that, after removing around 16 screws, easily lifts up and can be set aside while poking around

Products, QSC, ERI

Buy it on Amazon Not in stock but can be here quick This item is not in stock, but QSC can usually get more to us very fast, providing they have inventory. We’ll notify you promptly if we hear of any delay. Even though we’d love to ship everything free, there are some exclusions for heavy and oversized gear. Still, all gear can be delivered right to your door hassle-free. Choose “Free Economy Shipping” as the delivery method at Checkout. Valid only on shipments within the contiguous United States.

Homes like this do not come up for sale often. If you have been waiting for the perfect house in Playa Del Rey, you have found it. Blocks from the beach, located on .

More customer reviews I started looking around for a performance power amp that was in between crown and Behringer. Now while I consider Crown the holy grail of power amps, I didn’t feel like spending the cash for the Harley-Davidson of power amps. So when looking, I actually took a look at parts express and their most popular power amps.

To me, the majority of the people that visit that site have their head screwed on straight and care about quality products. While a lot of the reviews showed promise for Behringer, my cousin and I currently employ a tube based preamp in my studio, and while it worked flawlessly in the beginning, all the pot’s on my preamp are now fuzzy and buzzy. His preamp sucked from day one, buzzing at 60Hz, requiring post process filtering which saps the nuances out of the recording.

The speakers had more dynamic to the sound, and it was absolutely fantastic. They are definitely not the greatest speaker out there, but they put out the high SPL sound I was looking for in a live performance. The amplifier drives them pretty well, though I cant help but be slightly disappointed with the result. I am confident that the amp is not the culprit though due to how well it has driven my other smaller studio speakers. The other great thing is the 6 year transferable warranty.

While I don’t really care too much about warranties, Behringer’s abysmal 1 year warranty pushed me over to QSC. That’s pretty much saying what I think about my current products, they know its too risky to warranty a product longer than a year.

Connecting other speakers to SONOS system

Now you can enjoy the same multidimensional experience in your home theater. Ceiling speakers Dolby Atmos enabled sound bar Dolby Atmos enabled speakers are specially engineered to direct sound upward, where it reflects off the ceiling to produce an incredibly lifelike re-creation of overhead sound. Integrated units that also include traditional forward-firing speakers Add-on modules, containing only the upward-firing elements, that you put on top of your current speakers or on a nearby surface A Dolby Atmos enabled sound bar includes upward-firing speakers.

While two Dolby Atmos enabled speakers, modules, or overhead speakers will deliver a compelling experience, we recommend using four if possible. While this setup will deliver a compelling experience, we recommend using four Dolby Atmos enabled speakers, modules, or overhead speakers if possible. This will deliver more precisely located and realistic overhead sounds.

up vote 2 down vote While you should use a cable designed for the job, this is not because using an instrument cable will damage speakers or the amp, but because an instrument cable is designed for low noise and low current, a speaker cable may have significant current going through it so needs to be able to cope with high power.

Originally Posted by Nebakanezer You got a good deal on a good mixer! Most people would probably set it up as such: Pre-fader auxes are usually used for monitor mixes. But with the post-fader auxes you will typically be returning the signal after it is ran through an effect, eq, etc into the aux return or sometimes into a channel in the mixer. People have used post-fade auxes as monitor mixes, it’s just that when you move the faders to adjust the sound out front , the monitor mix changes.

You can power as many speakers as you are capable of once a feed is sent out of the mixer, but tailoring individual monitors will be limited. Don’t let this deter you, my old band got by pretty well on a 2 monitor mix split between 4 speakers. It just took some patience to figure out which 2 were capable of sharing a mix. This is good stuff! And thanks everyone for the replies. You guys do a good job of explaining things to a person with limited experience with this stuff!

Nord User Forum

QSC designers, headed by Pat Quilter, have optimized output and appearance while reducing raw material cost and weight. It’s all here — dramatic styling, easy hookup and adjustments, excellent audio quality and QSC reliability. Binding posts support all other speaker wiring systems. Minimum depth chassis The GX3 is ideal for speakers in the watt Program range.

Today we’ll be talking about properly setting up for a live gig with the QSC K Series Speakers. We’ll show you how to set up your Speakers with a mixer for professional live sound, or just using them directly with an iPod and a microphone for parties or casual applications.

Overview Product Details Product Description The PowerLight 3 Series is designed for the most demanding live audio users, whether in touring rigs or fixed installations. The most requested features of the PowerLight 2 series have been upgraded to deliver “the ultimate analog amplifier”, while the QSC Dataport ensures full compatibility with advanced digital processing and QSControl.

Three models range in power from watts to watts per channel at two ohms, all in two-rack space chassis that are only In addition to higher power, the PowerLight 3 Series offers higher input voltage, selectable sensitivity, and easily adjusted rear panel switches with color coded LED indicators. For those users who simply want a high performance amplifier to go with their existing processor or console, the PowerLight 3 Series is an ideal choice, offering high power, excellent value, and zero signal latency.

For lower power applications, the PL and PL offer the same feature set, matched to upgraded versions of QSC’s most advanced linear amplifier platform. Recent advances in power supply capacitors further improve power and low impedance performance, while continuing to offer the best available audio performance. As a result, designers have the choice of running a single type of amplifier throughout their rig, or matching amplifier performance to specific transducer types.

In keeping with normal QSC design standards, back-to-front airflow provides up to twice as much long-term average power as most competitors, without dumping hot air into the rack. All PowerLight 3 models are built in the same chassis size, with common back panel layouts to facilitate easy racking and hookup.

QSC K Series Speakers Overview & Setup Tutorial